Acer Answers

Hard drive installation instructions for the TravelMate P215-52

This article only applies to: TMP215-52 models.

Some TravelMate P215-52 models include a storage bay that allows for installation of a secondary 2.5" hard drive. Use the steps below to install a secondary drive in your system.

Note: Acer recommends use of an anti-static wrist strap when adding hardware to your system.

Remove the AC adapter and make sure your system is completely powered off.
Remove the twelve screws securing the lower case.
Start at the hinge and carefully pry up the lower case to release the plastic clips. You may need to use a plastic pry tool designed to work on electronics to get started.
Work your way around the system to release all of the plastic clips, then lift up on the lower case to remove it.
Disconnect the battery from the mainboard.
Install the hard drive carrier onto the hard drive, then attach the 4 screws to secure it in place.
Connect the hard drive cable to the hard drive.
Align and install the hard drive module into the empty slot and secure it with four screws.
Connect the hard drive cable to the mainboard.
Connect the battery to the mainboard.
Install the lower case and push firmly around the edges to secure the lower case, then reinstall the 12 screws to secure it.

Swift Series Intel^® Evo™

Game Pass

Acer Corner

Gaming on Chromebook

Swift Series Intel® Evo™

Game Pass

Acer Corner

Gaming on Chromebook

Swift Series Intel^® Evo™