Es1-571-349N - Black screen

1stklaas
1stklaas Member Posts: 5

Tinkerer

edited October 2023 in 2020 Archives

- Acer logo appears 
- Blue screen 
- Back to Acer logo with "Preparing Automatic Repair" 
- Black screen

This has been infintitely looping for 2 days

I've tried:
- Plugging into mains
- Pressing Alt+F10 on power up, which then says "Please wait" then gives me black screen and goes back to beginning
- Pressed F2 on power up to see if D2D recovery is enabled and it is, but Alt+F10 still doesn't make it enter into recovery mode

Best Answer

  • 1stklaas
    1stklaas Member Posts: 5

    Tinkerer

    Answer ✓
    @aphanic solved the issue using bob.omb's modified win10pex64.It actually bypassed the boot loading.The Windows PE couldn't boot but thanks to your advise I did some extra research and found bob.omb it come with windows pe the thing that seperate it from windows pe is that it comes with gnu grab.2 bootloader like linux.Then after it loaded you just press repair mbr one of the utilities it has wa lah you are done thanks @aphanic

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,085 Trailblazer
    Hi,
    Could you please post the full model name of your laptop, like E5-xxx.
  • aphanic
    aphanic Member Posts: 959 Seasoned Specialist WiFi Icon
    While we wait for the model number, if D2D doesn't work all you can probably do is reinstall Windows yourself, meaning plugging in a USB with a Windows installer, deleting every partition from the internal disk and continuing with the installation (it'd create the necessary ones, you don't need to).

    One thing that comes to mind if you performed a firmware upgrade just before that happened is that it sometimes reverts back the settings to the default. And if Windows was installed with SATA mode being AHCI for example and the default in your machine was RST it wouldn't boot. Are you able to see the cause of the bluescreen when it appears? It's in the lower part of the screen.

    You could boot off of a USB stick to get your data off of the disk and to an external one if you through with reinstalling Windows, or reinstall Windows on top of that installation (I wouldn't recommend it, but since it's possible I should point it out).
  • 1stklaas
    1stklaas Member Posts: 5

    Tinkerer

    Es1-571-349N
  • 1stklaas
    1stklaas Member Posts: 5

    Tinkerer

    Tried @aphanic tried booting of usb stick after the acer logo it goes to the black screen.changed the boot to usb in bios and used f12 to boot 
  • aphanic
    aphanic Member Posts: 959 Seasoned Specialist WiFi Icon
    Oh... that's not good, if you can't boot from USB sticks either...
    • It's hardware related, not much we could do from here I think :anguished:, you'd need to take it to a repair shop or Acer service center.
    • The USB stick wasn't created correctly, there are some things to consider when booting from USB media:
      - If the boot mode is set to Legacy, booting from NTFS is fine.
      - If the boot mode is set to UEFI, the boot partition of the USB needs to be FAT32. And what's more, apparently 64-bit UEFI can't boot 32-bit UEFI code directly.
      - If the boot mode is set to UEFI and Secure Boot is enabled, whatever you want to boot has to be properly signed and approved by the firmware. It's not a problem for Microsoft OSes since their key is already enrolled, but if what you try to boot is Linux it may be a problem depending on the distribution.
      - MBR, PBR need to be set accordingly, depends on what you're trying to boot.
    Question, do you have another computer you could use to create a bootable USB stick? If possible I'd like you to try to create a new following a utility called Rufus and an image I made the other day.

    The procedure is simple, with the USB stick plugged in you select it first at the top, then use the SELECT button to choose the image and finally START at the bottom. Rufus ought to select the appropriate settings already, but keep this in mind:
    • GPT for UEFI
    • MBR for Legacy
    This is it:



    As for Linux, you could use Rufus too to create the drive and at least the 64-bit version of Mint is able to boot even if Secure Boot is enabled in UEFI mode.
  • 1stklaas
    1stklaas Member Posts: 5

    Tinkerer

    I can boot from my puppy linux cd but the problem is I can't boot from Windows disc to install a new OS don't why after asking me if I wanna boot from the cd press any key it then goes to the acer logo does a progress circle bar then black screen.but with linux it work fine can even see files on harddrive problem is work while cd is running .I seriously wanna install Windows and I used rufus for the usb
  • aphanic
    aphanic Member Posts: 959 Seasoned Specialist WiFi Icon
    Aaaaaaand I forgot to give you the link for the image, silly me haha: https://mega.nz/#!1N9RiY5Q!L35NhaRmRqeEbknQpnJ95HLxB_yM_z82iwB53bTFuDU

    Give that a shot, it's a Live 64-bit Windows 10 with some basic stuff (reboots by closing the launcher window). I can't think of a reason why it wouldn't allow you to boot from a Windows USB stick, usually the hard part is getting Linux to boot haha.

    It may be dumb but double check the BIOS settings for the format you choose for the USB stick just in case, but other than that I'm afraid I'm out of easy ideas to try :#
  • 1stklaas
    1stklaas Member Posts: 5

    Tinkerer

    Answer ✓
    @aphanic solved the issue using bob.omb's modified win10pex64.It actually bypassed the boot loading.The Windows PE couldn't boot but thanks to your advise I did some extra research and found bob.omb it come with windows pe the thing that seperate it from windows pe is that it comes with gnu grab.2 bootloader like linux.Then after it loaded you just press repair mbr one of the utilities it has wa lah you are done thanks @aphanic
  • Yarkane
    Yarkane Member Posts: 7 New User
    Oh wow, I was beginning to think I'm becoming mad.

    I have exactly the same issue than you, and it's been days I try and try to solve it. I'm gonna try aphanic's solution !
  • Yarkane
    Yarkane Member Posts: 7 New User
    It did not work for me. I'm writing my own post.

    But to know that I'm not the only one with this issue exactly at the same time also with an Acer computer is quite interesting.