Acer aspire new ram - aspire 5742g

2»

Answers

  • Jego86
    Jego86 Member Posts: 13

    Tinkerer

    yes it boots normaly with 2GB. A litle bit slower, but its working.

    so on the side, i have bin looking for solution my self, and i found this:

    Symptom 1: “IRQL NOT LESS OR EQUAL” error screen on startup

    The IRQL error is a memory related error that often appears if a system process or a driver attempts to access a memory address without proper access rights.

    So... without proper access rights...BIOS do that?

  • JackE
    JackE ACE Posts: 44,330 Trailblazer
    Does it boot with only one new 4GB module? Jack E/NJ

    Jack E/NJ

  • Jego86
    Jego86 Member Posts: 13

    Tinkerer

    No it does not.

    so i boath this ram:

    Crucial 4GB DDR3L-1600 SODIMM

    CT51264BF160BJ

    and on a diferent forum wase this:

    I checked the compatibility of this memory module with your laptop. Crucial gives this result:

    so again i bouth a nother pair of ram.

    Crucial (RAM) DDR3 SO-DIMM 4 GB 1600 MHz (CT51264BF160B)

    tomorow i wil check if it works.



  • JackE
    JackE ACE Posts: 44,330 Trailblazer
    Did Crucial make a mistake in its module number for this model? Jack E/NJ

    Jack E/NJ

  • Jego86
    Jego86 Member Posts: 13

    Tinkerer

    Answer ✓
    No i bouth wrong ...  :# i didnt know that " J " at the end of part number wod make a diference. The rest is the same ddr3 1600mhz so-dimm...
    So now its runing fine with crucial RAM DDR3 SO-DIMM 4GB 1600MHz ( CT51264BF160B)  :) tnx for your help. 

  • JackE
    JackE ACE Posts: 44,330 Trailblazer
    Thanks for your report. I think that it is an easy to get wrong module since the general specification seem to be the same. Jack E/NJ 

    Jack E/NJ

  • Guilledl8ac8er
    Guilledl8ac8er Member Posts: 2 New User
    JackE said:
    Sorry. Your laptop lists 1.35volt DDR3L modules, not 1.5volt. Jack E/NJ




    Hola Estimad@.

    En mi caso tengo un par de las crucial tal cual indica en su publicación, y me sigue sin andar. El problema es persistente, coloco esas RAM 8gb) y el laptop comienza a reiniciarse, el BIOS reconoce los módulos pero no logra iniciar Windows (Win 10 pro), sino que me lleva a un error de pantalla azul y luego de unos segundos se apaga sola.

    PD: tengo como casi todos los del post, un ACER - ASPIRE 5742G, CPU i5-480M, tarjeta de video nvidia GeForce GT540M con 4 gb de ram (2 x 2gb).

    Ya actualicé el BIOS pero sigo sin poder solucionar eso del inicio de Win.

    Si alguien tiene una solución al problema del aumento de memoria, les agradezco.
  • JackE
    JackE ACE Posts: 44,330 Trailblazer

    (1) ¿Cuál es el código o mensaje de error de la pantalla azul?

    (2) ¿La instalación de Win10Pro prosigue correctamente con los módulos de RAM de 4 GB originales?


    (1) What is the blue screen error code or message?

    (2) Does the Win10Pro installation proceed OK with the original 4GB RAM modules?




    Jack E/NJ