Acer One 10 S1001 says your pc ran into a problem and needs to restart

darex23
darex23 Member Posts: 3 New User
edited February 12 in Tablets

Hi! Good day everyone.

 

Who has the same laptop as mine (Acer One 10 S1001)? 

or anybody who knows how to fix the error "your pc ran into a problem and needs to restart"?

 

i have tried entering safe mode, unfortunately, i wasnt able to enter safe mode.

i believe the possbile keys are F8, shift+F10 / alt+F10.

 

also, ive seen people having the same error, they fixed it by windows auto repairing, i do not know how to do this.

 

so my last resort is, to repair it using my bootable USB.

 

 

but this is the most tiring problem ive been facing for already a week.

 

 

whatever i do, my bootable usb cannot be detected. my bios info is aptio setup utility - copyright (c) 2014 american megatrends inc, in the bios option,

there is only one boot priority option which is the [windows boot manager].

 

some says disable the "secure boot", ive done so, saved it, restart, but there is no other option added.

on the top right side, it says; 

1. System running in User Mode with enrolled Platform key (Pk)

2. CSM function is disabled.

 

some people experienced the same problem, but unlike mine, after the disabled the secure boot, they got additional options, and was able to enable the CSM function, which they say, will lead you to adding new boot devices.

 

and btw, these are the options i only got in bios,

the bios setup options are very limited.
like in the
"MAIN" tab
-you can only edit the system date and time

"ADVANCE" tab
-CPU config
-ppm config

"BOOT" tab
-boot option #1
-secure boot menu
>secure boot enable/disable
>secure boot mode standard/custom

"save and exit"

 

 

 

please if you happen to know the issues, please help me.

thank you!

[Edited the thread to add issue detail]

Answers

  • Blayn-Acer
    Blayn-Acer Administrator Posts: 2,355 Community Administrator

    Sorry you are having problems. What kind of bootable USB drive are you using? Is it one you made using Acer Recovery management, one you ordered from us, or is it one you made via some other method?

  • darex23
    darex23 Member Posts: 3 New User

    by the way, i was able to make my USB detectable.

     

    but WHY?!

     

    after entering bios setup, changing boot priorities to 1st boot option = USB, and 2nd boot option = windows boot manager,

    save changes, and exit.

     

    after the restart, it still went to blue screen with the same error "your pc ran into problems"  after the acer logo.

     

    nothings changed. 

     

     

    is this a hardware defect? 

  • Blayn-Acer
    Blayn-Acer Administrator Posts: 2,355 Community Administrator

    My suspicion is that this will be a hardare issue that may require repair. If you power the system down completely, and try pressing Alt + F10 when you see the Acer logo when it is first powering on, are you able to get into recovery? If not, I suggest contacting technical support in your region to inquire about repair.

  • darex23
    darex23 Member Posts: 3 New User

    first of all, i would like to thank you Blayn for responding my thread.

     

     

    ive tried alt+F10 already. and it ddnt work. 

     

    omg............

     

     

    by the way, is there a particular OS installer for UEFI computers?

    i mean, i believe my acer one 10 has UEFI firmware. 

     

    and i was thinking that the reason why my bootable USB either win 7/8 in it is not working because my installer is not for UEFI???

  • indri23
    indri23 Member Posts: 1 New User

    Hi Everyone, 

     

    I've got the same issue as darex, 

    I had faced this issue for the last 2 week, 

    I had set my bootable usb with UEFI system with GPT, and it's didn't work either,

    the problem still same, once I got an acer logo and press F2, I'll face with bios option,

    and for boot option, there's still no boot option for usb,

    and the worst is I try to press ALT + F10 to get recovery option, and it didn't work either,

     

    I had try to change my usb with microsd and again!, it didn't work..

    what should I do then?

    it's there an issue for a hardware or something wrong with the boot option on my bios,

    please help me,

    Thank you

     

    Best

    Indri 

  • billsey
    billsey ACE Posts: 31,672 Trailblazer

    Your bootable USB needs to be formatted FAT32, not NTFS. Any chance that's the problem?

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • DJSUKANTA01
    DJSUKANTA01 Member Posts: 1 New User

    DOWNLOADE RUFUS  

     

    CREATING USB BOOT **********  (GPT PARTITION SCHEME FOR UEFI)***********

     CONNECT TO S1001 PRESSING VOL UP+VOL DOWN +POWER ON KEY FOR 20 SEC

    BIOS SCREEN SHOWING FLASHING NOT DONE

     DONT WORRY  SELECT BOOT FROM USB SAVE IT

    RESTART ITS BOOT FROM USB

     

     

  • pioneerfix
    pioneerfix Member Posts: 1 New User
    Hi I also have similar problem, after I tried to reset the windows system and click continue to windows after the reset process, all I can see is black screen. I tried to install another OS, but acer one 10 will not detect my bootable usb. Anyone, help..please!
  • billsey
    billsey ACE Posts: 31,672 Trailblazer
    You need to be installing the same version of the OS, I think yours is the 32bit version.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • ROCKYCHAHAL
    ROCKYCHAHAL Member Posts: 1 New User
     i have installed 3bit window 10, now my pc just hangs after few seconds of startup. nothing works. i installed window few times(also tried different copy of window) but nothing works.
    what to do now?? please help
  • billsey
    billsey ACE Posts: 31,672 Trailblazer
    When you did your install did you have it wipe everything from the drive to start clean or did you try to keep the partitions?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • PRK
    PRK Member Posts: 1 New User

    DOWNLOADE RUFUS  

     

    CREATING USB BOOT **********  (GPT PARTITION SCHEME FOR UEFI)***********

     CONNECT TO S1001 PRESSING VOL UP+VOL DOWN +POWER ON KEY FOR 20 SEC

    BIOS SCREEN SHOWING FLASHING NOT DONE

     DONT WORRY  SELECT BOOT FROM USB SAVE IT

    RESTART ITS BOOT FROM USB

     

     

    I TRY THIS OPTION AFTER PRESSING VOL UP+VOL DOWN +POWER ON KEY FOR 20 SEC BIOS SCREEN APPEARS WITH RECOVERY OPTION AFTER RESTART BLUE SCREEN APPEARS THAN OFF

  • eaglewarriors
    eaglewarriors Member Posts: 1 New User

    can you show me how to make the usb detectable? because i have the same problem, thx b4