Laptop Acer Nitro 5 keep on restarting How to fix this issue?

raz99
raz99 Member Posts: 1 New User
edited December 2022 in Nitro Gaming
Hi I recently purchased Acer Nitro 5

Device name LAPTOP-55MADQ3F
Processor AMD Ryzen 7 4800H with Radeon Graphics           
Installed RAM 16.0 GB (15.4 GB usable)
System type 64-bit operating system, x64-based processor

After a couple of month of uses, I find that my laptop keep on restarting with multiple error, then my screen blacked out. I send to acer highpoint to fix the screen and other things. Now same issue, my laptop keep on restarting. I update all the driver reboot safe mode and follow the steps online to check on the auto reboot. But now, there is no blue screen error pops out but still the laptop keep on restarting. How to fix this issue?
[Edited the thread to add the issue detail]

Answers

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi raz99,

    Reset this PC and keep my files
    1. Shutdown the unit. Press and hold alt+F10 key. Then turn ON the unit.
    2. You will get a blue screen. Choose the option troubleshoot. 

    3 Ways to Reset Acer Laptop to Factory Settings without Password


    4 Methods to Reset an Acer Laptop with Windows 7810 or Linux

    3 Ways to Reset Windows 10 Computer to Factory Settings  Password Recovery
    3. Select Keep my files to refresh your PC and reinstall your operating system without removing your personal files. Click Next to continue. Important If you have apps installed on your PC, they will be removed. Recovery - 25
    4. Resetting the PC will reinstall Windows, change settings back to their factory defaults and remove all preinstalled apps and programs without removing your personal files. Click Reset to continue.
    5. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
    6. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
    7. Follow the process until it completes.
    8. When your PC has completed the reset process, Windows will have been reset back to its factory default settings without removing your personal files.​

  • Urban_fantasy01
    Urban_fantasy01 Member Posts: 1 New User

    my nitro 5 goes straight to restart as soon as I turn it on I have reset it in safe mode and it is still restarting

  • Daniel007900
    Daniel007900 Member Posts: 1 New User

    I have the same problem. When going idle it restarts unexpectedly. the characteristics are the same as the drawback.

    Uninstall the "Quick Access" and it did not restart for weeks, now it is restarting again.

    Please help me with this issue.

  • William_mk2
    William_mk2 Ally Posts: 4,044

    @Daniel007900

    @poi12


    We need to determine whether it is a hardware or software issue..  Turn off the computer.  Tap f2 while turning on the computer.  It will go to bios.  Please stay on the bios screen for 30 mins.  If the computer is not restarting in bios then it is a software issue.  If the computer is restarting in bios screen then it is a hardware issue.  

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • William_mk2
    William_mk2 Ally Posts: 4,044

    @Daniel007900

    @poi12


    It might also be the issue with battery, charger or power outlet.  Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet.  Try to use an alternative charger if possible.  Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )  

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • William_mk2
    William_mk2 Ally Posts: 4,044

    @Daniel007900

    @poi12


    I am really sorry for the inconvenience..  Let us do the basic steps first..


    Doing the power drain and bios defaults will really help. Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, you can find a pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer. Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery. Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door. Just below that you can find a latch. If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.  Hold the power button for 1 minute. After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.


    Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear. Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.  

     

    It might also be the issue with battery, charger or power outlet.  Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet.  Try to use an alternative charger if possible.  Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )  


    Try windows x 

    go to device manager 

    expand Battery

    right click on all the items below battery – uninstall 

    Restart the computer 

     

    It should work fine.. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • William_mk2
    William_mk2 Ally Posts: 4,044

    @Daniel007900

    @poi12


    If it is still not working then we have to do a refresh and reset


    click on start - settings - update and security - recovery - reset this pc - get started 


    or 


    on start - type here to search - type reset this pc - click on reset this pc on the top - click on get started 


    It will show you keep my files and remove everything

    chose keep my files 

    chose the account - type the password - click on local reinstall - click on reset 

    It will be in progress.. 

    login to computer and start using the computer. 

    If it is still not working 


    click on start - settings - update and security - recovery - reset this pc - get started 

    chose remove everything 

    click on local reinstall - just remove my files - click on reset

    It will be in progress


    Note:


    If you do refresh ( keep my files ) - all your personal files like pictures, music , documents , videos will still be intact.  Only the applications will be lost


    If you do reset ( remove everything ) - you are doing a factory default.  It will become like a day one computer.  It will wipe out everything and take your computer to day one like a new computer. 



    You can also do the recovery in an alternative way..



    There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously.  It will go to repair mode. It will show you chose an option, continue, troubleshoot.  If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..


    It will show you chose an option, continue, troubleshoot

    Go to troubleshoot - click on reset this pc

    click on keep my files ( only applications will be lost )  chose your account and type your password  - click on local reinstall - click on reset

    It will be in progress 


    If the keep my files option is not working 


    Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 

    It will reinstall windows. 


    If the just remove my files is not working.. 


    Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 

    It will reinstall windows. 


    Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer.  Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.  Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 


    Even after reinstalling the windows if you face the same issue then it is a hardware issue.

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • kongwork96
    kongwork96 Member Posts: 6

    Tinkerer

    your can try term down one ram slot see still have auto restart issue or not

  • sri369
    sri369 ACE Posts: 2,623 Pathfinder

    Next time the system restarts, you can try looking into windows event logs and check what is going on. Let me know if you need help checking this area.

    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
    ---------
    Nitro 7 - AN715-51 - user benchmark: https://www.userbenchmark.com/UserRun/37631045