Hi no bootable device after Windows update :-( - Acer Aspire 3

MrFinn
MrFinn Member Posts: 3 New User
edited June 2021 in Aspire Laptops
Hi everyone 

My Acer aspire 3 did a Windows update last night and when ive turned it on this morning, its saying no bootable device, gone into settings and its showing no hdd :-( 
Is this due to the update or has the hard drive failed 

Thank in advance and have a great day 

//Edited the content to add model name.

Comments

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi MrFinn,

    Reset this PC and keep my files
    1. Shutdown the unit. Press and hold alt+F10 key. Then turn ON the unit.
    2. You will get a blue screen. Choose the option troubleshoot. 

    3 Ways to Reset Acer Laptop to Factory Settings without Password


    4 Methods to Reset an Acer Laptop with Windows 7810 or Linux

    3 Ways to Reset Windows 10 Computer to Factory Settings  Password Recovery
    3. Select Keep my files to refresh your PC and reinstall your operating system without removing your personal files. Click Next to continue. Important If you have apps installed on your PC, they will be removed. Recovery - 25
    4. Resetting the PC will reinstall Windows, change settings back to their factory defaults and remove all preinstalled apps and programs without removing your personal files. Click Reset to continue.
    5. You will be shown the reset progress on the screen. The screen will turn off during the reset process.
    6. The screen will turn back on when it is installing Windows. Your PC will restart several times during the reset process.
    7. Follow the process until it completes.
    8. When your PC has completed the reset process, Windows will have been reset back to its factory default settings without removing your personal files.​

  • MrFinn
    MrFinn Member Posts: 3 New User
    Thank Easwar
    Yes tried all that, its not picking HD up so must be a fault, do you know if I can change the SSD HD or is it a fixed unit
    Thanks in advance
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi MrFinn,

    In the BIOS information page is the unit HDD is showing. ​Can you in the BIOS page.
  • William_mk2
    William_mk2 Ally Posts: 4,084
    MrFinn,

    On the bios, computer should recognize the hdd.     After going to bios go to info menu,   check the hdd info.    It should show the model name and serial number.   If the hdd is not getting detected,  try the basic steps given below and then go to bios and check the hdd info.. 

    Please understand hard drive did not fail.   There might be a communication issue with the motherboard and hdd.    Sometimes if there is a loose connection on the hdd device you will be facing this issue.     We might have to reseat the hdd if there is communication issue.       However since you are facing the issue after the update, you can try these basic steps to load the windows... 

    Kindly follow the steps given below..

    Turn off the laptop. Disconnect or unplug  the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you dont find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug  the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed,  flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

    While turning on the computer, tap f2. It  will go to bios. Press f9  once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.


    If it is loading the windows, hdd is automatically detected.    Otherwise you need to go to bios and check the hdd info on the info menu.



    Hit 'Like' if you find the answer helpful! 
    Click on 'Yes' if the comment answers your question!

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★