Predator PH517-51 Crashing Issue

I had this laptop since Jan 2019. No issue at all when I got it. Now its crashing left and right trying to play a game. I can see the spike in thermal temp; the idle temp I seen it at is around 40'c and highest was at 89'c.
Troubleshooting steps:
Reset the OS (4 times)
Reapply thermal paste (12 times)
Memtest (3 times) (no issue found)

Specs:
32GB (2x16GB) Corsair Vengeance DDR4 2666MHz
1TB Samsung 970 EVO
nVIDIA GTX 1070

OS: Windows 10 ver 1909

Event Viewer:

System

-	Provider

[ Name]

EventLog

-

EventID

6008

[ Qualifiers]

32768

Level

2

Task

0

Keywords

0x80000000000000

-	TimeCreated

[ SystemTime]

2020-03-02T04:12:14.546041200Z

EventRecordID

17304

Channel

System

Computer

DESKTOP-4Q9LVPD

Security

-	EventData

9:39:02 PM

‎3/‎1/‎2020

10

E4070300000001001500270002003903E40703000100020003002700020039033C0000003C000000000000000000000000000000000000000100000000000000

Binary data:

In Words

0000: 000307E4 00010000 00270015 03390002
0010: 000307E4 00020001 00270003 03390002
0020: 0000003C 0000003C 00000000 00000000
0030: 00000000 00000000 00000001 00000000

In Bytes

0000: E4 07 03 00 00 00 01 00 ä.......
0008: 15 00 27 00 02 00 39 03 ..'...9.
0010: E4 07 03 00 01 00 02 00 ä.......
0018: 03 00 27 00 02 00 39 03 ..'...9.
0020: 3C 00 00 00 3C 00 00 00 <...<...
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 00 00 00 00 ........
0038: 01 00 00 00 00 00 00 00 ........

Accepted answers

devildogd

I actually figured out the problem and I'm kind of embarrassed for not doing this.

I test my 64GB (4x16GB) memory, 1 kit of 32GB (2x16GB) came back with errors on MemTest86. RMA'd to Corsair and going to retest it once it comes back.
I have 3 SSD installed. 2x m.2 (1TB each) and 1 SSD (2TB). The 2 TB SSD has a bad sector.

All comments

xapim

devildogd which thermal paste did you used i recommend kryonaut or similar spread method just a thin layer covering both diodes its enough too much thermal paste its bad also you shouldnt be getting those temps if you used a good thermal paste unless you have damaged/bended the heatsink while disassembling/assembling it my first troubleshooting advice its for you to perform a battery power drain press/hold for 30s+ and let it rest for 2/3h to completely drain all capacitors followed a bios setup defaults.
Also if you havent already create a stock recovery usb drive via care center for safe keeping (this should have been done first day you have booted it when the OS was still the stock and working fine) next backup everything you need and perform a stock recovery clean install select delete everything option to complete rule out any software issues you will be probably stuck on 1909 anyway because since 1809 every windows 10 update 1903/1909 would overwrite the acer stock recovery os version to not let it downgrade to a previous one under the current this can only be done via rufus the media creation tool will always install the latest version available anyway hope you get it sorted

Also the data from event viewer its only good for MS engineers they are the only ones who know exactly what that means

devildogd

I actually figured out the problem and I'm kind of embarrassed for not doing this.

I test my 64GB (4x16GB) memory, 1 kit of 32GB (2x16GB) came back with errors on MemTest86. RMA'd to Corsair and going to retest it once it comes back.
I have 3 SSD installed. 2x m.2 (1TB each) and 1 SSD (2TB). The 2 TB SSD has a bad sector.