Where is J2 jumper on the Revo Center RC111 Motherboard

sangokushi
sangokushi Member Posts: 12 New User

From another post, it said to access the BIOS on your RC111, do the following:

Turn off the computer and all attached devices. Remove the cover. Remove the rear I/O plate that covers the VGA port on the back of the unit.  Locate the JP2 debug/user mode jumper on the mainboard. Remove the Pin 1 jumper block to enable the system for debug mode. Connect the power cable to the rear panel. Connect a USB keyboard to the USB port on the mainboard. Connect a monitor to the VGA port on the mainboard. Restart the system. Turn on the monitor. During POST, press <Delete>.

 

Can you please confirm the circled jumper is JP2

 

 

J2.png