Topic

Reply
Frequent Visitor
Deepak
Posts: 1
Registered: ‎11-29-2012

how to install base system device driver

[ Edited ]

I have  Accer aspire e1-571 i want to know abaut base system device, i have installed all drivers in my laptop but base system device driver pending i want to knw how to install it.

os win 7 pro 64 bit

 anyone know abaut this plz tell me.

Thank You

 

Acer Technician
Acer-Tommy
Posts: 6,351
Registered: ‎11-13-2012

Re: how to install base system device driver

Any system that we ship with Windows 7 would have all drivers installed at factory as part of the load.

 

Drivers for the system are available on our site Driver Downloads link.

 

Please visit http://www.acer.com/ to choose your regional site for localised support options.

Important Links: Global Support Pages | Knowledge Base Articles
Remember to mark posts that resolved your issue with Accept as Solution. You can even mark multiple posts in a single thread. This will make it easier for others to find the same information. Use the kudos-thumbs-up.png Give Kudos button to offer a thumbs-up for good post content and a pat on the back to the author.

Regular Visitor
hondasr
Posts: 2
Registered: ‎09-15-2013

Re: how to install base system device driver

This doesnt answer the question. We install all the drivers from the support area but 2 drivers still missing and both apears as System Device Driver.

JCB
Regular Visitor
JCB
Posts: 2
Registered: ‎10-24-2013

Re: how to install base system device driver

I can confirm that this is in fact the case.

 

I have the Acer Aspire E1-571G which had Windows 8 preloaded.

 

I formatted and installed Windows 7 Ultimate 64-bit.

 

Downloaded all the drivers from the aces website for this OS and successfully installed all the drivers.

 

However, there are 2 drivers still missing (as indicated by hondasr).

 

Both these drivers are "Base System Device" (as indicated in the screen-shot below).

 

Untitled-1.png

 

Please ACER SUPPORT; see if you can provide us with some insight as to solve this.

Regular Visitor
thunreigu
Posts: 2
Registered: ‎10-30-2013

Re: how to install base system device driver

I'm using the Acer Aspire 4560 - windows 8.1 64 bit and i have the same problem as JCB, 2 Base system devices are missing drivers.

Pls help!

Regular Visitor
thunreigu
Posts: 2
Registered: ‎10-30-2013

Re: how to install base system device driver (SOLVED)

My problem solved after install Card Reader Driver ^_^ gluck JCB

JCB
Regular Visitor
JCB
Posts: 2
Registered: ‎10-24-2013

Re: how to install base system device driver (SOLVED) - Confirmed

I can confirm that this solution worked for me as well.

 

After reading thunreigu's post; I decided to give it a try.

 

I also figured out what I did wrong:

I extracted all the downloaded drivers to a folder and went to device manager whereby I "update device driver" and scan the folder (where all drivers are extracted to) for drivers.

This worked for all drivers except the last two (as mentioned in one of my previous posts).

 

I solved this by actually running the setup file for the following two drivers:

CardReader_Broadcom_15.0.7.2_W7x86x64 (think this solved the problem)

Chipset_Intel_9.3.0.1020_W7x86x64 (installed this just for incase)

 

PROBLEM SOLVED

Frequent Visitor
zakarydakaridoc
Posts: 1
Registered: ‎04-07-2014

Re: how to install base system device driver (SOLVED) - Confirmed

Yeh hi. Ive got this same issue. Im curious how you resolved it, I get booted into safe mode and the installer won't run in safe mode????

 

thanx in advance

 

Did you know? Acer Community is also available in the following languages: