Tema
I think that settings will be:
system settings/wireless & network/tap on ethernet label (not the switch)
i don't know if you can modify tapping over the informations on the right side.
If i was helpful, a KUDOS is appreciate and remember to mark "Accept as Solution" if you solved your problem.
I'm not an Acer employee.
No, i don't own this model but i managed a lot android.
When I switch Ethernet to "ON" the IP address changes from (diabled) to (disconnected) Maybe that will change when I connect the cat5 from my reciever.
Yes it's correct, you need to connect the Lan cable to have IP assigned or perhaps able to manually assign.
I don't know exactly where you can set manually your settings but i would try, doing a long tap on the IP or look at the top right corner and see if something is available
Also when I turn on the Wi-Fi: At the top rt corner there is also: scan, add network and Advanced.
scan - Shows the correct IP address but it's "Not in range"
Add Network - opens up another chain of sub-windows that confuses me
Advanced - just get gives a Mac address & Notify me when an open network becomes available.
When you enable WiFi, you will be notified if a network is available.
do a long tap on that network, you will have a popup with "modify network", tap it
on the next popup, scroll down and tick "show advanced options"
scroll down again and tap on "IPv4 settings"
you will have 2 options "DHCP" (automatic), "static" (manual)
choose "static" and insert your settings.
Always remember to do a connection at time, you can't have both enabled.
If i was helpful, a KUDOS is appreciate and remember to mark "Accept as Solution" if you solved your problem.
I'm not an Acer employee.
United States