em
04-23-2014
07:17 AM
- editado pela última vez em
04-23-2014
02:10 PM
por
ElizabethS
The contact email I worked with was [edited to comply with guidelines]. I can get you part numbers tomorrow but I don't get the impression they are available for consumers. I would send Frank an email telling him your situation and ask what he can do.
Brian
em
04-23-2014
10:02 PM
- editado pela última vez em
04-23-2014
10:46 PM
por
ElizabethS
Thanks Brian.
I contacted Frank and he passed me to Premier support. They have a new SOP for this now. Premier supported emailed me the part number and the phone number to order. The part number is below. Long story short, I had to call another nubmber after the first number turn me down because they cannot sell me accessories if my system is still under warranty. Second, they can only sell me accessories for the system that it came with. Make sure you have your SN before you call. They will need that to open a new account for you.
Phone: [edited for privacy]
Part Number: DC.50018.001
PSU FSP FSP500-50AAGA,(A01001) 500W ACTIVE PFC 100-127V/220-240V, SINGLE-RAIL DESIGN
Price: $64.35 + $10 for shipping + tax
It's pretty pricey after shipping and tax. I should get the part early next week.
em 05-01-2014 07:46 AM
I received the 500W power supply today. Replacing it only took minutes. However, I've spent the last few hours trying to get 4 videos to work with the computer. The computer boot with video if I don't have any other video card plugged in it. If I plug any video card there's no screen. The computer beep once at boot like it does normally and seems to boot normally - just no video. Out of the 4 video cards 2 require additional power and 2 don't. I took the video card from another computer, so I know the cards are good. One of which is brand new. I tried to unplug the hard drive and wireless mpcie card too, but no luck. Not sure if my computer is bad or what. I've also updated the BIOS too.
em 05-05-2014 06:53 PM
make sure you disable Windows 8 secure boot or the card will not work.
em 05-06-2014 10:29 AM
Yeah. After hours of searching on the internet, I had to disable Secure Boot and then go to change CSM to Always to enable the legacy video Bios to finally get it to work.
Maio
- editado pela última vez
Maio
por
Phil-3
I'm hoping this thread is the answer i've been looking for. I recently purchased an ATC-605-UR13, only to find out about the power supply after the fact. I'm almost certain my model comes with the same 300w power supply as the other models described in this thread. Any information on how to get my hands on the 500w power supply would be appreciated. I've searched for the model number FSP500-50AAGA only to come up with some sites I'd rather not buy from. Thanks!
[edited to comply with guidelines]
Junho
You can now find the 500W version of these power supplies on ebay. Item 231267206305 ($99). 80 Gold Plus rated so they should be great quality.
Julho
- editado pela última vez
Julho
por
Phil-3
I am wondering how you deal with the old PSU. My AT3 doesn't start at all. Worst thing is this is a refurbished desktop I bought from eBay.
I am thinking about replacing a PSU. Currently the only replacement option is that fsp500 which is $90. I just think it's too much for me since my intension is not upgrading the graphics. Thanks!
Zeran
[edited to comply with guidelines]
United States
© 2014 Acer Inc.