Mixing RAM

Ozzy13
Ozzy13 Member Posts: 18 New User
edited March 2023 in 2017 Archives

Hello all,

 

I have an Aspire TC-220 EB52.  It has 1 x 8gb RAM.  I have 2 x 4gb taken from an Aspire TC-220 EB51.  At the moment I have them inserted .... 8gb - Slot 1; 2 x 4gb - Slots 3 & 4 but only seem to have 9138mb usable memory.  Should they be in a different configuration or should I just remove the 2 x 4gb.

 

Thanks for any input.   

Best Answer

  • laurent_14
    laurent_14 ACE Posts: 10,018 Trailblazer
    Answer ✓

    Hello,

     

    If you want a memory amount of 16Gb, you have to insert the modules like this:

    • DIMM1: 8Gb
    • DIMM2: 4Gb
    • DIMM3: 4Gb
    • DIMM4: Free
      #DIMM are marked on the printed circuit board
    France

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,018 Trailblazer
    Answer ✓

    Hello,

     

    If you want a memory amount of 16Gb, you have to insert the modules like this:

    • DIMM1: 8Gb
    • DIMM2: 4Gb
    • DIMM3: 4Gb
    • DIMM4: Free
      #DIMM are marked on the printed circuit board
    France
  • Ozzy13
    Ozzy13 Member Posts: 18 New User

    Many thanks Laurent_14,

     

    I can't really see anything that identifies the 4 slots so may I safely assume that the original 1 x 8gb module was in DIMM1 when I opened the case.  I did not move it; I just inserted the (2) 4gb modules to the 2nd and 4th slot because the colours matched.  The inside guts of a computer is not my 'bailiwick'. Smiley Wink 

     

    Many thanks for the assistance.