tópico Re: aspire s3 em Notebooks & Netbooks

aspire s3

jarmas7 — Sun, 24 Aug 2014 22:55:27 GMT

Hello All. I have an Aspire S3 Ultrabook in which the HD is failing. I purchased a new HDD but I am unable to clone it from the original HDD because it has bad blocks and crashes a 53%.

I was able to createa a recovery flash drive that my aspire is booting from. However, I cannot use it to create a new bootable HDD. It does not see the HDD that is installed. I go to advance and attempt to retore but it does not see anything. What I am doing wrong?

The goal is to install a new HDD and put the ultrabook back to out of box condition with OS that it came with which is version 8

I appreciate any help here.

Re: aspire s3

IronFly — Mon, 25 Aug 2014 08:08:10 GMT

The HDD is listed as device on BIOS?

press and tap F2 as soon you press Power ON on your S3.

Re: aspire s3

jarmas7 — Mon, 25 Aug 2014 10:59:53 GMT

Yes the HD appears in the bios

Re: aspire s3

IronFly — Mon, 25 Aug 2014 11:18:36 GMT

Check in BIOS if you can switch between UEFI and CSM, select CSM and reboot.

Re: aspire s3

IronFly — Mon, 25 Aug 2014 11:47:17 GMT

mmm

i'm not sure you can re-install windows with a "recovery flash drive" in a new HDD; this "recovery flash drive" will just help you troubleshooting the actual windows installation.

Create USB recovery drive:

http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive

Create installation media:

http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

Re: aspire s3

jarmas7 — Tue, 26 Aug 2014 21:17:20 GMT

I changed to bios to 'legacy mode' and now the difference is that I see the windows 8 symbol briefly and Im back to choose and option.

I cant get it to boot at all. I cant see to create a backup image from the original damed HD which.

Very lost here. Appreciate any help I can get

Re: aspire s3

IronFly — Tue, 26 Aug 2014 21:31:30 GMT

From the old HDD, you are not able to recovery at least the "acer recovery partition"?

if not, the only solution is to give a call to Acer support service and ask for DVD/USB media recovery disk.

give a look here too:

http://www.eightforums.com/installation-setup/44021-need-help-reinstalling-windonws-8-usb-2.html#post368623

Re: aspire s3

jarmas7 — Wed, 27 Aug 2014 12:35:30 GMT

What I did is put back the original failing drive which booted up with the usual HD warning.
Interestingly enough with a USB to SATA converter I attached the replacement driver I can see the new drive with the EXACT SAME partitions as the failing drive in device manager. The only difference is that on the on the failing drive c drive says Healthy (Boot, Page file, Crash dump, Primary partition). On the new HD is just says is "Healthy" and nothing else.

When i try to boot up with the new drive by itself i keep getting an immediate message saying "no bootable device found" this happens in both legacy and non legacy mode of BIOS.

Suggestions?

Re: aspire s3

IronFly — Wed, 27 Aug 2014 16:03:57 GMT

This happens because your new drive is not primary partition and bootable, you can do it with windows "disk manager" if you have a working windows 7 or 8 PC, connecting the new HDD with USB to sata.

Re: aspire s3

jarmas7 — Wed, 27 Aug 2014 16:10:11 GMT

I am in disk manager but do not know how to make the new drive bootable.