tópico Critical situation urgent help em Notebooks & Netbooks

Drivers for Acer Aspire One KAV60

saaiq — Thu, 06 Mar 2014 04:44:53 GMT

Hello to every one! m new to this forum kindly help me anyone

i have Acer aspire notebook Model no KAV60 but on acer website i cannot find this model number

as i want fresh drivers for this model

can any one tell the solution

Regards....

Re: Drivers for Acer Aspire One KAV60

laurent_14 — Thu, 06 Mar 2014 15:46:49 GMT

Hello saaiq,

Drivers of the Acer Aspire One KAV60 (AOD250):

Acer Worldwide - Choice your country - Support --> Search by product --> Group Netbook, Chromebook --> Series Aspire One --> Products AOD250 --> Operating System --> Driver and you can select Latest or All.

Critical situation urgent help

saaiq — Thu, 06 Mar 2014 16:29:15 GMT

hello m very thankful for your reply

now one of the most critical problem occurs my laptop which is KAV60 of acer aspire goes hanged during work and screen turns sometimes blue and sometimes white since from a month and i have to powered off the system because shutdown options and window enviornment totally untouched when coloured screen comes

i tried different solutions i scan the system from viruses i tried microsoft security essentials and others secrutiy programs and also i changed the LCD VGA cable but still problem is there

kindly kindly kindly help if you understand

is it internal hardware problem any software problem or hard disk is going to crash?

i hope you reply

regards...

Re: Critical situation urgent help

laurent_14 — Thu, 06 Mar 2014 17:25:12 GMT

Hello,

What's your windows version?

Have you tried to recover your system?

Re: Critical situation urgent help

saaiq — Fri, 07 Mar 2014 04:53:01 GMT

hello! i install fresh window so many times but still problem is there.the system boot too late and slow.sometimes recovery fails... there is windows7 hoem premium version in this laptop ... kindly help i could not trace the problem whether it is hardware or software?

Re: Critical situation urgent help

laurent_14 — Fri, 07 Mar 2014 16:01:46 GMT

Hello,

To enter in Bios Setup Utility:

When you see the Acer screen, press F2.

1- Note the HDD model name (information tab)

2- Press F9 to load default settings

3- Press F10 to save and exit the bios setupt utility

Your laptop will restart automatically. Normally, you'll hear only one bip.

If the result is same, send me the HDD model to give you a diagnostic tool.

Re: Critical situation urgent help

saaiq — Fri, 07 Mar 2014 17:23:06 GMT

ok i try

Re: Critical situation urgent help

saaiq — Sun, 09 Mar 2014 07:04:39 GMT

Hello! thanx for your suggestions i tried your given suggestions but problem is still there system goes hanged and also blaked screen issue remain same

my system's HDD model no is TOSHIBA MK2555GSX ATA DEVICE

kindly if any diagnostic tool available help me......

Regards,

Re: Critical situation urgent help

laurent_14 — Sun, 09 Mar 2014 18:00:35 GMT

Hello,

I don't know if you have access to the boot menu (F12).

If you have access, you can try to test your HDD with Seatools for DOS.

Link software: SeaTools

Link guide: SeaTools for DOS Guide

"SeaTools for DOS is a comprehensive, easy-to-use diagnostic tool that

helps you quickly determine what is preventing you from accessing data

on your desktop or notebook computer. It includes several tests that

will examine the physical media on your Seagate or Maxtor disc drive

and any non-Seagate disc drive."

Re: Critical situation urgent help

saaiq — Tue, 11 Mar 2014 11:20:44 GMT

Hello! i downloaded the seatool for DOS but it is disc image how i burn it?

as there is no cd room with this KAV60 laptop .and how i use this tool either at the time of boot?

Regards..

Re: Critical situation urgent help

laurent_14 — Tue, 11 Mar 2014 17:20:20 GMT

Hello,

1- Download, install and use FlashBoot (Demo) (easy to use) to convert the image file to bootable USB.

2- Boot on USB key (When you see Acer screen, press F12 - Boot Menu --> Choice USBHDD).

3- Run the basic tests.

An other way, How To Create Bootable USB Disk For Seagate SeaTools For DOS

Re: Critical situation urgent help

saaiq — Wed, 12 Mar 2014 14:16:17 GMT

hello! thanx for helping me kindly tell what size of usb should be either 2 GB or 4GB?

Regards

Re: Critical situation urgent help

laurent_14 — Wed, 12 Mar 2014 16:17:41 GMT

Hello,

An usb key of 2 GB is more than enough. Personaly, I work with an old usb key of 128 MB (only for DOS)!

Use Flashboot because you'll need it to prepare the test of memory (may be).

Otherwise, have you the possibility to connect a monitor on the netbook. In this case, you'll be able to know if it's a default of internal display (netbook).

Note: <Fn> + <F5> - Display toggle - Switches display output between the display screen, external monitor (if connected) and both.

Re: Critical situation urgent help

saaiq — Thu, 13 Mar 2014 05:34:10 GMT

hello! i make usb of 2 GB bootable using seaget bootable usb toolkit and as this laptop doesnot support to boot from usb so i tried the p lop bootmanager and now when i boot from usb using plop boot manager there is blank screen comes with text "Free DOS" and nothing progress further i dont know why?

then i download software to burn disc image to usb and using it i installed seaget iso to usb but when i booted from this plop not recognized it it display error no device detected

and when i tried falshboot and make usb bootable using flash boot and then boot from usb using p lop it aslo show blank balck screen with text starting cmain and nothing progress further

i think i could not found how to use this appropriatedly

kindly help me

regards...

Re: Critical situation urgent help

laurent_14 — Sat, 15 Mar 2014 18:12:37 GMT

Hello,

I tested this solution an it works perfectly! Same quality of test. No mouse pointer.

Tools and file:

1- Download the file Seatools for dos version V1.12 (Text) - ISO CD-ROM IMAGE: SeaToolsDOS112.ISO

2- Download ISO Toolkit (portable version - no install): ISOToolkit.zip

3- You need Win32 Disk Imager (portable version - no install). You have it.

Procedure:

1- Format your USB key with the Windows Disk Manager in FAT32.

2- Execute ISO Toolkit --> Extract image tab, you extract SeaToolsDOS112.ISO in a folder.

3- In this folder, rename SeaTools.ima --> SeaTools.img

4- Execute Win32 Disk Imager, write Image File: SeaTools.img (new one) on your usb key.

Normally, you'll find these files and folder on your USB key:

5- Boot on your USB key (personally, I see it like a removable device - FDD)

6- Make Short (touch S) and Long (touche L) test only.

7- To quit the program CTRL+ALT+DEL to reboot.

Re: Critical situation urgent help

laurent_14 — Sun, 16 Mar 2014 17:09:33 GMT

Hello,

In your bios setup utility, F12 boot menu is disabled by default.

So you can change the value in enabled to access the differents devices.

It wasn't necessary to install Plop boot manager.