tópico Re: RL70 boot problems em Desktops & All-In-Ones

RL70 boot problems

pmitja — Sun, 19 Jan 2014 16:35:33 GMT

Hi, I have Revo RL70 Windows 7 version. I was using Live USB Ubuntu and due to power loss the machine turn off. After I have tried to boot id would go to "black screen" with a blinking curser in the left top conner. I have tried to power cycle it a few times (holding power button for 10-15 sec), unplugging and plugging back, and Crtl-Alt-Del. Non of them helped. Any idea? Also is there a anyway hardware way to reset CMOS of the bios?

Re: RL70 boot problems

laurent_14 — Mon, 20 Jan 2014 17:47:34 GMT

Hello pmitja,

-- OFF VOLTAGE --

To clear CMOS, place this jumper on pins 2-3. The pin 1 is on right.

Don't forget to replace it on pins 1-2 (Normal position).

Note: If you haven't a ESD equipment, be careful to static electricity.

Re: RL70 boot problems

pmitja — Tue, 21 Jan 2014 04:17:31 GMT

Thank you for the answer.

I will try to open the box and reset the CMOS!!!

Re: RL70 boot problems

pmitja — Fri, 24 Jan 2014 23:43:48 GMT

Thank you very much!

It worked!!!

1. What memory I can buy in order to upgrade from 2GB to....?

2. What is the max memory allowed?

3. I found minipcie2 port there what is it for?

Thanks again

Re: RL70 boot problems

laurent_14 — Sat, 25 Jan 2014 17:52:44 GMT

Hi pmitja,

1- Memory slot number: 2 slots

Support memory size per socket: 1GB, 2GB

Support memory type: DDR3 SO-DIMM

Support memory interface: DDR3 1066/1333MHz

2- Slot 1: 1GB~2GB

Slot 2: 1GB~2GB

Maximum system memory supported: 4GB

(look P16)

3- I'll reply you later

Give me the exact model of your desktop to comfirm the max of memory.

I saw on the Acer website two models: PT.SJ4E2.010=2GB and DT.SJ4EF.002=4GB.