Iconia w510 - Keyboard, Touchpad, Driver Power State Failure

yvanvw — Mon, 11 Feb 2013 12:07:25 GMT

Hello,

I have an Iconia W510 for a week now, and I have several problems (latest updates of 10 Feb 2013 have been applied through the live updater software).

Keyboard: sometimes when I type, random keys are not "entered" in Windows. Is it a hardware problem?
Touchpad: it is sometimes jumpy especially when I click on a button. I have already read the thread about the problem, but I don't encouter all the problems described here. I guess this is a driver / firmware problem.
I deactivated the Power Savings mode of the wifi card, because it could not fully connect to the network after a logon (limited connection). This has solved the problem of the limited connection but has created a new problem when I want to shutdown the device. I get a BSOD with the message Driver Power State Failure, and it restarts, so I cannot shutdown the device except if I activate again the Power Savings mode of the wifi card. I guess this is a driver problem.

Any help would be welcome.

Thank you

Yvan

Re: Iconia w510 - Keyboard, Touchpad, Driver Power State Failure

Acer-Blayn — Wed, 13 Feb 2013 19:36:19 GMT

If your keyboard keys are not displaying each time they are pressed, you may have a hardware problem that requires service. In regards to your wireless issue, you may try loading the latest wifi driver at http://www.acer.com, click on Support, then Drivers and Manuals.

tópico Iconia w510 - Keyboard, Touchpad, Driver Power State Failure em 2013 Archives

Iconia w510 - Keyboard, Touchpad, Driver Power State Failure

Re: Iconia w510 - Keyboard, Touchpad, Driver Power State Failure